Introduction
BL-M2625XP1 is a highly integrated Dual-band WLAN+Bluetooth Combo M.2 Card. It combines a 2T2R Dual-band WLAN subsystem with PCI Express interface controllers and a Bluetooth v5.2 subsystem with USB interface controller. This card compatible IEEE 802.11 a/b/g/n/ac/ax standard and provides the maximum PHY rate up to 1201Mbps, it supports Bluetooth dual mode . The card provides a complete solution for high-performance integrated wireless and Bluetooth devices such as laptops, set-top boxes, smart TVs, etc.
External Long Range WiFi Module with Monitor Mode for Solar Inverter Connectivity
Features
M.2 Type 2230 S2 Key A+E Card
Operating Frequencies: 2.4~2.4835GHz or 5.15~5.85GHz
Dual-band 2.4GHz/5GHz and support 80MHz/40MHz/20MHz bandwidth
Support DBDC (dual band dual concurrent)
Wireless PHY rate can reach up to 1201Mbps
Connect to external antenna through MHF4/IPEX4 connectors
Power Supply: DC3.3V±0.2V power supply
Block Diagra
General Specifications
Card Name | BL-M2625XP1 |
Chipset | SCM2625A |
WLAN Standards | IEEE 802.11a/b/g/n/ac/ax |
BT Specification | Bluetooth Core Specification v5.2/4.2/2.1 |
Host Interface | PCI Express 2.0 for WLAN & USB2.0 FS for Bluetooth |
Antenna | Connect to the external antenna through MHF4/IPEX4 connectors(Two antennas) |
Dimension | M.2 Type 2230 Pluggable Card: 30.0*22.0*2.3mm (L*W*H) |
Power Supply | DC 3.3V±0.2V@ 1.6A (Max) |
Operation Temperature | -20℃ to +70℃ |
Operation Humidity | 10% to 95% RH (Non-Condensing) |
Product Dimension
Card dimension: 30.0*22.0*2.3mm(L*W*H; Tolerance: ±0.3mm_L/W, ±0.2mm_H)
IPEX / MHF-4 connector dimension: 2.0*2.0*0.6mm (L*W*H, Ø1.5mm)
Package Dimensions
Package specification:
1. 35 modules per blister plate and 700 modules per box.
2. The blister is bound with wire membrane and put into anti-static vacuum bag.
3. Put 1 bag of dry beads (20g) and 1 humidity card in each anti-static vacuum bag.
4. The outer box size is 35.2*21.5*15.5cm.
