Availability: | |
---|---|
Quantity: | |
BL-M7628NA2
LB-LINK
Without BT
MTDIATEK
2T2R
Router:WAN,LAN,I2C,I2S,SPI
Introduction
BL-M7628NA2 is a wireless router WLAN module, designed base on MT7628NN chipset. fully complies with IEEE 802.11b/g/n standards, it can be applied in the fields of IP camera, smart home and IOT. It support both wire and wireless connection, Wireless PHY rate can reach up to 300Mbps, It has rich interface, which can solve the monitoring audio and video services better, and it has excellent RF performance and wireless transmission is more stable.
Features
WLAN Operating Frequency: 2.4~2.4835GHz
WLAN Support 2T2R mode with 20/40 bandwidth, maximum PHY rate up to 300Mbps
Connect to the external antenna through IPEX connector
Power Supply:DC 3.3V±0.2V
Application
IP Camera
Security monitor
wireless security NVR systems
Intelligent wireless control
Smart house
Block Diagram
General Specifications
Item | Description |
Product Name | BL-M7628NA2 |
Main Chip | MT7628NN |
Chip | Flash@8MB(16MB Optional) DDR2@64MB(128M Optional) |
Interface | WAN/LAN, USB2.0, I2C, SPI Card,2*UART, 1*GPIO,5*LED, RESET |
IEEE Standards | IEEE 802.11b/g/n |
Operating Frequencies | 2.4GHz~2.4835GHz |
Modulation | 802.11b: CCK, DQPSK, DBPSK 802.11g: 64-QAM,16-QAM, QPSK, BPSK 802.11n: 64-QAM,16-QAM, QPSK, BPSK |
Working Mode | Router (Default Router) |
Wireless Data Rate | 802.11b: 1, 2 ,5.5,11 802.11g: 6,9,12,18,24,36,48,54 802.11n: MCS0~7, HT20 reach up to72.2Mbps, HT40 reach up to150Mbps HT40 reach up to 300Mbps (2T2R) |
Antenna Type | connect to the external antenna through IPEX connector |
Dimension(L*W*H) | 33.0 mm *18.0 mm *2.6mm, Tolerance: ±0.15mm |
Power Supply | DC3.3V±0.2 (800 mA Max) |
Clock Source | 40MHz |
Operation Temperature | -20℃ to +70℃ |
Operation Humidity | 10% to 95% RH (Non-Condensing) |
Software Features
Software Features | |
Working Modes | Router/Client Routing/Repeater/Bridging and AP/Client(Default Router) |
Default Gateway | 192.168.16.1 |
Account/Password | admin/admin |
WAN Connection Type: | PPPOE、STATIC、DHCP(Default DHCP) |
DHCP | Open |
SSID | B-LINK_XXXXXX(MAC address after six) |
Firewall Security Features | MAC/IP/Port Filtering、URL Filter |
Wireless Security Mode | WPA-PSK/WPA2-PSK (Default Disable) |
WDS Mode | Repeater Mode(Default Disable) |
WPS | Default Disable |
QoS Setup | Default Disable |
System Management | Load Factory Defaults |
Update Firmware | |
Restart Router |
Product Dimension
Module dimension: 33.0*18.0*2.6mm(L*W*H; Tolerance: ±0.15mm)
IPEX / MHF-1 connector dimension: 2.6*3.0*1.2mm (L*W*H, Ø2.0mm)
Package Dimensions
Package specification:
1. 60 modules per blister plate and 960 modules per box.
2. The blister is bound with wire membrane and put into anti-static vacuum bag.
3. Put 1 bag of dry beads (20g) and 1 pcs humidity card in each anti-static vacuum bag.
4. The outer box size is 35.2*21.5*15.5cm.
Introduction
BL-M7628NA2 is a wireless router WLAN module, designed base on MT7628NN chipset. fully complies with IEEE 802.11b/g/n standards, it can be applied in the fields of IP camera, smart home and IOT. It support both wire and wireless connection, Wireless PHY rate can reach up to 300Mbps, It has rich interface, which can solve the monitoring audio and video services better, and it has excellent RF performance and wireless transmission is more stable.
Features
WLAN Operating Frequency: 2.4~2.4835GHz
WLAN Support 2T2R mode with 20/40 bandwidth, maximum PHY rate up to 300Mbps
Connect to the external antenna through IPEX connector
Power Supply:DC 3.3V±0.2V
Application
IP Camera
Security monitor
wireless security NVR systems
Intelligent wireless control
Smart house
Block Diagram
General Specifications
Item | Description |
Product Name | BL-M7628NA2 |
Main Chip | MT7628NN |
Chip | Flash@8MB(16MB Optional) DDR2@64MB(128M Optional) |
Interface | WAN/LAN, USB2.0, I2C, SPI Card,2*UART, 1*GPIO,5*LED, RESET |
IEEE Standards | IEEE 802.11b/g/n |
Operating Frequencies | 2.4GHz~2.4835GHz |
Modulation | 802.11b: CCK, DQPSK, DBPSK 802.11g: 64-QAM,16-QAM, QPSK, BPSK 802.11n: 64-QAM,16-QAM, QPSK, BPSK |
Working Mode | Router (Default Router) |
Wireless Data Rate | 802.11b: 1, 2 ,5.5,11 802.11g: 6,9,12,18,24,36,48,54 802.11n: MCS0~7, HT20 reach up to72.2Mbps, HT40 reach up to150Mbps HT40 reach up to 300Mbps (2T2R) |
Antenna Type | connect to the external antenna through IPEX connector |
Dimension(L*W*H) | 33.0 mm *18.0 mm *2.6mm, Tolerance: ±0.15mm |
Power Supply | DC3.3V±0.2 (800 mA Max) |
Clock Source | 40MHz |
Operation Temperature | -20℃ to +70℃ |
Operation Humidity | 10% to 95% RH (Non-Condensing) |
Software Features
Software Features | |
Working Modes | Router/Client Routing/Repeater/Bridging and AP/Client(Default Router) |
Default Gateway | 192.168.16.1 |
Account/Password | admin/admin |
WAN Connection Type: | PPPOE、STATIC、DHCP(Default DHCP) |
DHCP | Open |
SSID | B-LINK_XXXXXX(MAC address after six) |
Firewall Security Features | MAC/IP/Port Filtering、URL Filter |
Wireless Security Mode | WPA-PSK/WPA2-PSK (Default Disable) |
WDS Mode | Repeater Mode(Default Disable) |
WPS | Default Disable |
QoS Setup | Default Disable |
System Management | Load Factory Defaults |
Update Firmware | |
Restart Router |
Product Dimension
Module dimension: 33.0*18.0*2.6mm(L*W*H; Tolerance: ±0.15mm)
IPEX / MHF-1 connector dimension: 2.6*3.0*1.2mm (L*W*H, Ø2.0mm)
Package Dimensions
Package specification:
1. 60 modules per blister plate and 960 modules per box.
2. The blister is bound with wire membrane and put into anti-static vacuum bag.
3. Put 1 bag of dry beads (20g) and 1 pcs humidity card in each anti-static vacuum bag.
4. The outer box size is 35.2*21.5*15.5cm.
content is empty!