M8822CP1 2T2R 802.11a/b/g/n/ac WiFi+BT5.0 Module

Introduction

BL-M8822CP1 is a highly integrated Dual-band WLAN+Bluetooth Combo M.2 Card. It combines a 2T2R Dual-band WLAN subsystem with PCI Express interface controllers and a Bluetooth v5.0 subsystem with USB interface controller. This card compatible IEEE 802.11 a/b/g/n/ac standard and provides the maximum PHY rate up to 867Mbps, it supports Bluetooth dual mode with  v5.0/v4.2/v2.1 compliant. The card provides a complete solution for high-performance integrated wireless and Bluetooth devices such as laptops, set-top boxes, smart TVs, etc.

Features

• Operating Frequencies: 2.4~2.4835GHz or 5.15~5.85GHz

• IEEE Standards: IEEE 802.11a/b/g/n/ac

• Form factor: M.2 2230 generic A key or E key

• Wireless PHY rate can reach up to 867Mbps

• Connect to external antenna through MHF4 connectors

• Power Supply: DC3.3V±0.2V power supply

Block Diagram

General Specifications

Card Name	BL-M8822CP1
Chipset	RTL8822CE-CG
WLAN Standards	IEEE802.11a/b/g/n/ac
BT Specification	Bluetooth Core Specification v5.0/4.2/2.1
Host Interface	PCI Express 2.1 for WLAN & USB2.0 FS for Bluetooth
Antenna	Connect to the external antennas through MHF4 connector
Dimension	M.2, 30*22*2.15mm (L*W*H)
Power Supply	DC 3.3V±0.2V@ 1000mA   (Max)
Operation Temperature	-20℃ to +70℃
Operation Humidity	10% to 95% RH (Non-Condensing)

Product Dimension

Card dimension: 30.0*22.0*2.15mm(L*W*H; Tolerance: ±0.15mm)

IPEX / MHF-4 connector dimension: 2.0*2.0*0.6mm (L*W*H, Ø1.5mm)

Package Dimensions

Package specification:

1. 35 cards per blister plate and 700 cards per box.

2. The blister is bound with wire membrane and put into anti-static vacuum bag.

3. Put 1 bag of dry beads (20g) in each anti-static vacuum bag. 1 pcs 3 point humidity card.

4. The outer box size is 35.2*21.5*15.5cm.