M8800DU5-L 1T1R 802.11b/g/n/ax WiFi+B5.2 Module

BT5.2 Supported Dual-Core WiFi Module for Advanced Arduino Integration

Introduction

BL-M8800DU5-L is a highly integrated WLAN + Bluetooth Combo module base on AIC8800DL chip, which combines a 1T1R WLAN subsystem and a BLE v5.2 subsystem.This module compatible IEEE 802.11b/g/n/ax standard and provides the maximum PHY rate up to 287Mbps, offering feature-rich wireless connectivity at high standards, delivering reliable, cost-effective and high throughput from an extended distance.

Features

• Operating Frequency: 2.4~2.4835GHz

• compatible IEEE 802.11b/g/n/ax

• WLAN PHY rate reach up to 287Mbps@TX and 230Mbps@RX with 20/40MHz bandwidth

• Support STA, AP, WLAN Direct modes concurrently

• Compatible Bluetooth core specification v5.2, supports BLE only

Block Diagram

General Specifications

Module Name	BL-M8800DU5-L
Chipset	AIC8800DL
WLAN Standard	IEEE 802.11 b/g/n/ax
BT Specification	BLE v5.2
Host Interface	USB2.0 for WLAN & Bluetooth
Antenna	IPEX / MHF-1 connector for external WLAN/BT antenna
Dimension	13.0*12.3*2.1mm (L*W*H)
Power Supply	DC 3.3V±0.2V @ 500 mA (Max)
Operation Temperature	-20℃ to +70℃
Operation Humidity	10% to 95% RH (Non-Condensing)

Product Dimension

Module dimension: 13.0*12.3*2.1mm(L*W*H; Tolerance: ±0.3mm_L/W, ±0.2mm_H)

IPEX / MHF-1 connector dimension: 2.6*3.0*1.25mm (L*W*H, Ø2.0mm)

Package Dimensions

Package specification:
1. 1,000 modules per roll and 5,000 modules per box.
2. Outer box size: 37.5*36*29cm.
3. The diameter of the blue environment-friendly rubber plate is 13 inches, with a total thickness of 28mm 

    (with    a width of 24mm carrying belt).
4. Put 1 package of dry agent (20g) and 1 humidity card in each anti-static vacuum bag.
5. Each carton is packed with 5 boxes.