Introduction
BL-M8812EU5 is a highly integrated 2.4G single band wireless module, which combines a USB interface, a WLAN MAC, a 2T2R capable Base Band and Radio. The module has built-in high-power FEM and RF Filters, also supports 10MHz narrow channels to achieve higher TX Power & better RX sensitivity, significantly extending the WLAN communication distance, ideal for long-range wireless video transmission applications such as IP camera and UAV.
Features
Operating Frequency: 2.4~2.4835GHz
IEEE Standards: IEEE 802.11b/g/n
Support 2T2R mode with 10/20/40MHz bandwidth, PHY rate reach up to 300Mbps
Connect to external antennas through IPEX-1/MHF-1 connector
Host Interface is USB 2.0
DC 5.0V and 3.3V dual Power Supply
Block Diagram
![屏幕截图 2025-12-30 144544]()
General Specifications
Module Name | BL-M8812EU5 |
WLAN Standards | IEEE 802.11 b/g/n |
Host Interface | USB 2.0 |
Antenna | Connect to the external antennas through IPEX-1/MHF-1 connector |
Dimension | 35*22*3.3mm (L*W*H) |
Power Supply | DC 5.0V±0.3V@2000mA (Max) DC 3.3V±0.2V@800mA (Max) |
Operation Temperature | -20℃ to +70℃ |
Operation Humidity | 10% to 95% RH (Non-Condensing) |
Product Dimension
![屏幕截图 2025-12-30 144559]()
Package Dimensions
![1]()
Package specification:
1. 42 modules per blister plate，and 462 modules，462 shield covers，924 thermal conductive silicone pads per box.
2. The blister is bound with wire membrane and put into anti-static vacuum bag.
3. Put 1 bag of dry beads (20g) and 1 three-point humidity card in each anti-static vacuum bag.
4. The outer box size is 35.2*21.5*15.5cm.
